| | Sector | abcWater Storage and Supply | Tender Value | INR 16.36 Crore approx. | | Location | Maharashtra - India | Ref.No | 86940282 | | Closing Date | 09 - Sep - 2025 | | | | REPAIR AND RENOVATION OF MAIN WORKSHOP AT MTPF AMBERNATH, MAHARASHTRA, REPAIR AND RENOVATION OF MAIN WORKSHOP AT MTPF AMBERNATH, MAHARASHTRA, 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation, 160mm bend, Supply & Fixing Of Motorised Gi Rolling Shutter Clear Opening Galvanized Motorized Rolling Shutter 1.Curtin Shape; 95 Mm X 19g Thick Flat Gi Profile 2. Heavy Duty Side Plates 2 Mm With Airtight Rubber Seal 3.Bottom Supports 3mm Stiffners With Airtight Rubber Seal 3.35 X 100 Mm Heay Duty Ms Side Guides, 4.Heay Duty Bottom Section With Stiffner Angle Complete With All Accessories 5.Push Button Junction(Open/Close/Stop) 6.Drum Roller With Shaft And Bearings 7.22g Hood And Motor Cover 8. Heavy Duty Ms Roller/ Drum Motor 600 Kg Capacity, Including Removal Of Existing Shutter As Directed By Engineer Incharge, Providing Ridges or Hips of width 60 cm overall width confirming of prepainted metal Sheet Confirming the feed material is manufactured out of nominal 0.55 mm Base Metal Thickness (BMT) /0.64 Total Painting thickness with +/- 0.04mm Thickness tolerance, Hi-Tensile steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume AZ200 (Min. 200 gms/sq.mt total on both sides) with Super durable Polyester quality paint coat. The paint will have a total coating thickness of nominal 35 µm, comprising of nominal 20 µm exterior coat on top surface and nominal 10 µm reverse coat on back surface over nominal 5 µm primer coat on both surfaces of approved colour shade by concern authority. The exposed paint system’s shall have higher SRI value (Thermatech technology) and use inorganic (lead free) pigment in paint system , Shed 5, Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 82251987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles, FALSE CEILING & HVAC WORK FOR MTD LAB, TOOL ROOM, STANDARD ROOM ETC, Providing, designing, fabricating, installing of Decorative ACP Sheet with Aluminum duly powder coated (50-60 micron) as per approved design by Client/Architect. The dimension of the Sections will be determined after calculation. This rate is including of all materials like 4 mm Thick ACP Sheet, Fastner, paint, accessories, labour charges only, Providing & fixing of Commercial Lift of capacity 1000kg of speed 1m/s with 3 stops / opening will all accessories required to install Lift as per the direction of engineer incharge, GRANITE WORK FOR STAIRS WINDOWS ETC, With Granite Stone of area less than 0.50 Sq.m, HVAC SYSTEM (DSR& AOR-2019), LIGHTINING ARRESTER, POLYURETHANE CEMENTITIOUS FLOORING, Temperature 87.5°, Providing & Fixing of 150 Watt LED Pressure die-cast aluminum housing with polycarbonate lens. LED module fixed on die-cast aluminum heat sink for proper thermal management and LED driver compartment with 4 Stage Protection - Over + Under Voltage, Short Circuit, Reverse Polarity &Over Temp. Secondary lens optics provided for better and uniform distrubution. System efficacy should not be less than 130lm/W with nominal lumens of 19500 lumens , CRI > 70, CCT 5700K and lifetime of 50,000 hours at L70. Operating Temperature Range -20degC to 50degC with Potted Driver, THD<10 %, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 140V to 270V (nominal rated voltage –240V) 4kV internal + 10kV External (optional) surge protection. IP rating of IP66 and IK07 impact resistance. Driver should comply Driver safety requirements as per IS 15885 with BIS certification. Manufacture should have in house NABL testing facility. LM 79 report from NABL accredited Lab shall |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|